The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They stop the car from starting without a key fob and are effective in stopping hotwiring and other traditional methods of vehicle theft. However, newer techniques like key replication and relay theft are becoming more widespread.
To combat these latest trends The ghost immobiliser is designed to make your car completely inaccessible. It doesn't use LED indications radio signals, key fobs and is silent and discreet.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects to the CAN data network of your vehicle to stop key cloning and theft. It is an TASSA approved product and has been recognized by insurance companies. It is silent and virtually undetectable to thieves. It uses buttons in your steering wheel, the centre console, and door panels to make an individual pin code sequence that must be entered prior to being able to start your car. You can create up to 20 different sequences to provide greater security. The system is simple to install and doesn't require additional hardware.
To ensure the highest quality outcomes, it is recommended that you use a reputable CAN-immobiliser installer who specializes in your specific vehicle. Idealy, they should have a workshop in your area that you can visit to have your installation completed. You can also find various tools and equipment that can assist you in the installation. They will provide basic hand tools, multimeters, insulation tape and heat shrink tubing for protecting connections. A user manual will provide you with instructions for your vehicle's wiring.
Connect the battery prior to beginning the installation process to avoid short circuits or airbag deployment. Double-checking the CAN L and H wires is vital since a misidentification could lead to improper integration of the system. It is also a good idea to label or mark the wires. Finally, use a multimeter to verify that the power source identified is able to provide a consistent 12V power supply.
Advanced thieves can employ a variety of tactics to bypass the Ghost Immobiliser, including jamming and using spoofing signals. These methods work by amplifying the signal that is transmitted from your key fob to the electronic control unit in your vehicle. With the help of advanced anti-jamming technologies and a constant monitoring, you can protect your vehicle from these sophisticated attacks.
Security enhancing
Ghost immobilisers are an additional layer of protection to your car against theft. It is an PIN security system that you can enter via buttons on your dashboard or steering wheel, making it harder for thieves to take your car. The device is also designed to be hidden in your vehicle, with no LEDs or other signals that could warn thieves of its presence. It communicates with your car's ECU on the data bus, meaning it isn't vulnerable to the same hacking or relay attacks that could disable traditional security systems.
It's a great investment for those who have prestige cars that are at a higher risk of theft due to their price and popularity. Its enhanced security features guard against key duplicates, ECU swapping, and other threats to your car's security. Some ghost immobilisers are also integrated with apps, meaning you can arm and dearm quickly. They can also have an option for service/valet that allows you to temporarily disable them while your vehicle is being serviced or repaired.
Another benefit of ghost immobilisers is that it doesn't require any cutting of wire. This is an excellent option, particularly if your car is newer and does not include an immobiliser. Certain systems also work with GPS tracking devices, providing an extra layer of security to your vehicle. A GPS tracker can also reduce your insurance rates. If you opt to buy ghost immobilisers, make sure that it is TASSA verified and a professional installer will install it for you.
Compatible with all major models and brands
The Ghost Immobiliser has been designed to work with all major brands and models of vehicle, safeguarding your prized possessions from theft. It uses buttons in your steering wheel, centre console, or door panels to generate a unique pin code, which must be entered before you can drive your vehicle. The system is tamper-proof, undetectable and backed by three-year guarantee. It is also fully endorsed by insurance companies and insurance companies, which means it can help to lower your insurance premiums.
The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It is directly connected to the engine controller via the CAN bus. ghost immobiliser 2 means it's impervious to tampering, and is virtually impossible to remove or disable and is not targeted by organized car theft gangs. The Ghost system can also be paired with an iPhone app to monitor remotely and management.
You can create a PIN that is easy to remember, but mathematically, it is impossible to guess for thieves. The PIN can be customised and modified at any time so that you can keep your vehicle safe even when you park it on the street or in a public parking lot. You can also set a service or valet mode in case you need someone other than you to drive your car temporarily for instance, when it's in the garage for maintenance. This feature will also help to prevent your vehicle from being stolen by a shady mechanic. For added security you can select a Ghost call alert that will inform you when your car is in motion or if it has been moved.
Convenience
The ghost immobiliser is a highly effective security device that protects your vehicle against typical methods of theft such as key cloning, key stealing and relay attacks. It connects to the car's CAN data network and preventing communication with the engine ECU. This makes it very difficult for thieves to hack or clone your vehicle.
After installation, you'll need to enter a PIN code that is up to 20 digits using the buttons on your dashboard or steering wheel to start the engine. The system is completely hidden and inaccessible to thieves because it does not emit any radio frequency signals. It is also able to be programmed to change the PIN of the user, which adds security. The system is also designed to stop cutting of circuits, making it virtually impossible to alter.
If you have a problem remembering your PIN, there are systems that allow you to communicate with the immobiliser via an app on your smartphone, disarming it instantly. Some systems even have a valet/service setting that allows you temporarily to start your car, for example when you drop it off at a garage or valet park.
The Ghost Immobiliser is also unnoticeable to thieves because it does not transmit any radio signals, a major advantage over other aftermarket vehicle security systems. It is also easy to use and doesn't require complicated wiring. It can also be used in conjunction with a dash cam for additional security. This dash cam is the Thinkware F70, which features clear & crisp HD 1080p dashcam footage as well as Format Free Technology and parking mode. The system can be hardwired to ensure maximum performance and durability.
Installation
If you're looking to safeguard your vehicle from thieves It is essential to choose the right immobiliser ghost. This device will help to stop car theft by blocking communication between the engine controller unit (ECU) and key fobs. This stops thieves from stealing the signal and copying the key fob to begin your car. It also detects the presence of a tamper and notify the owner of the vehicle.
The device is easy to install and integrates with the vehicle's existing systems. It does not require any modification to the wiring of your vehicle and can be concealed in a concealed area, like under the dashboard. To make sure that the device is properly installed, follow instructions in the user manual. After installation, it's crucial to test the system. This will confirm that the immobiliser ghost works in the way it is intended.
You can purchase an Autowatch Ghost 2 immobiliser from an approved installer and get it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to steal or bypass the system. The installation process typically takes between 2 and 3 hours.
It is recommended that you review the wiring diagram for your vehicle prior to the installation process. This will allow you to locate the CAN High and Low wires. Low wires required to connect your Ghost to the engine of your vehicle. Double-check all connections to make sure they are secure and insulated.
After the installation is completed, you are able to start using the Ghost Immobiliser normally. It will turn off the ignition of your vehicle if you don't start it using the correct PIN, which you can enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode for when you require your vehicle to be cleaned or valet parking.